Western-digital My Cloud EX2 User Manual Manual de usuario Pagina 140

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 139
REPLACING A DRIVE
135
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
Inserting a Drive
Important: To avoid electrostatic discharge (ESD) problems, ground yourself by
touching metal before handling the device.
Preparing a Drive
The My Cloud EX2 comes with a bag holding the screws, tabs, and labels needed for
inserting the new drive. For WD replacement drives, you can reuse the parts attached to the
faulty drive.
Note: A standard phillips-head screwdriver is all you need..
1. Using a screw from the bag, attach a plastic tab to the top hole in the drive’s side (on the
right if the green board is facing you).
2. Attach a screw to the corresponding hole on the other side of the drive.
3. Attach label 1 or 2 to the top of the drive. Label 1 is on the left and label 2 is on the right,
when
looking down on the top of the unit. There are corresponding numbers on the
cross brace label.
Inserting One or Both Drives
Vista de pagina 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 167 168

Comentarios a estos manuales

Sin comentarios